進口化工軸流泵 

英國進口化工軸流泵Chemical axial flow pump

進口化工軸流泵概述

化工軸流泵參照升力線理論，吸取螺旋槳設計的經驗，發展了沿徑向變環量分布的軸流泵設計方法，并進行了廠內的模型試驗，與同類相比，重量輕，體積小，剛性好，效率高等特點。
主要應用于大流量、低揚程的場合，特別適用于制鹽、制堿的強制循環系統之中。

進口化工軸流泵結構特點
     1、轉速低，一般轉速在980r/min以內，符合結晶工藝要求運行平穩. 
     2、水力性能優異，效率 〉70%高效區寬，抗汽蝕性能好. 
     3、考慮泵介質流動方向為垂直向下進，水平方向出。水流作用力對泵軸的巨大影響，在泵**增設了泵軸外套保護裝置。使介質的俯沖作用力轉移到泵體上，從而保證了泵的運行穩定，大大減輕了介質對機械密封作用力的影響，延長了機器封使用壽命。該結構的改進在國內同類產品中邁出了較大的一步。另外泵體采用整體式鑄造剛性好，中間支承結構聯結穩定. 
     4、 軸承箱部位為方型長跨距重型結構，穩定性好，承載能力強，運行可靠，與國內同類產品相比安裝方便精確（原國內軸承箱為分體式）。前后兩端分別采用徑向短圓柱軸承和重型成對軸承。其軸承均采用INA（SKF）或優質軸承. 
     5、 封軸*，采用副葉輪動力密封和博格曼快裝式雙端面機械密封組合，外接冷卻沖洗水，改善軸封工作條件，機封壽命長。軸套外圓加大，與國內同類產品相比壁厚加厚變形小.

    密封腔處的徑向振擺小于0.05mm，保證了密封的可靠性和耐久性，延長了維修周期。可安裝填料密封和單端或雙端機械密封，并可安裝動力密封以供特殊場合使用。

進口化工軸流泵用途：
應用于大流量、低揚程的場合，特別適用于制鹽、制堿的強制循環系統中。
   
進口化工軸流泵性能參數

流量：300-1100m3/h
揚程: 3.5-8.5m
壓力：100PSI
溫度：≤170°C

進口化工軸流泵材質

所有過流部件均采用SS304、SS316、0Cr20Ni25Mo3Cu2、 Incolloy 825、Monel、400、904L、316L。
5 旋向 
從驅動端看，泵按逆時針方向旋轉。

進口化工軸流泵guan網：http://www.twvalve。。ｎｅｔ/html/3080.html

The import of chemical axial flow pump

British imports of chemical axial flow pump Chemical axial flow pump

Introduction of imported chemical axial flow pump

Hzw according to lifting line theory, draw propeller design experience, the development of the design method of axial flow pump with variable circulation distribution along the radial direction, and the model test is carried out and compared with the similar, light weight, small volume, good rigidity, high efficiency.

The utility model is mainly applied to the occasions of large flow rate and low lift, and is especially suitable for the forced circulation system of salt making and alkali making.

Structural characteristics of imported chemical axial flow pump

1, low speed, general speed within 980r/min, with the crystallization process running smoothly.

2, excellent hydraulic performance, high efficiency, wide area 70%, anti cavitation performance.

3, considering the flow direction of medium pump is vertically downward, a horizontal direction. The huge influence of the flow force on the pump shaft, and the pump shaft is additionally provided with a protective device for the shaft cover of the pump. So that the medium of the subduction force transferred to the pump body, thereby ensuring the stable operation of the pump, greatly reducing the effect of the medium on the mechanical seal force, extending the service life of the machine seal. The improvement of the structure has taken a big step in the domestic similar products. In addition the pump body adopts integral casting rigid, intermediate supporting structure coupling stability.

4, bearing box for square parts of long span and heavy structure, good stability, strong bearing capacity, reliable operation, compared with the domestic similar product installation is convenient and accurate (the original domestic bearing box split). The front and rear ends are respectively provided with a radial short cylindrical bearing and a heavy pair bearing. The bearings are made of INA (SKF) or international high quality bearings.

5, shaft sealing is advanced, the vice impeller dynamic seals and Bergman fast assembled double end mechanical seal combination, external cooling water, improve the working conditions of mechanical seal seal, long service life. The outer circle of the shaft sleeve is enlarged, and the wall thickness is thicker and the deformation is small compared with the domestic similar products

Seal radial vibration cavity pendulum is less than 0.05mm, to ensure the reliability and durability of sealing, prolong the maintenance period. Packing seal and single or double end mechanical seal can be installed and can be used for special occasions.

Imported chemical axial flow pump:

The utility model is suitable for the occasions of large flow and low lift, and is especially suitable for the forced circulation system of salt making and alkali making.

Performance parameters of imported chemical axial flow pump

Flow: 300-1100m3/h

Lift: 3.5-8.5m

Pressure: 100PSI

Temperature: less than or equal to 170 DEG C

Imported chemical axial pump material

All the over-current components are SS304, SS316, 0Cr20Ni25Mo3Cu2, Incolloy 825, Monel, 400, 904L, 316L.

5 spin to

From the driver side, the pump rotates counterclockwise.

Imported chemical axial flow pump Guan net: http://www.twvalve。。ｎｅｔ/html/3080.html

英國格林代理商上海凡而閥門有限公司，咨詢：

英國格林相關領域業績：杭州地鐵1號線、杭州地鐵2號線、杭州地鐵4號線，南京地鐵1號線、南京地鐵2號線、南京地鐵3號線、南京地鐵4號線、南京地鐵10號線。

帝國化學工業、美國科氏工業、美國聯合能源、艾默生電氣、盧克石油、中國海洋石油。

Green field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.