進口潛水軸流泵
英國進口潛水軸流泵Submersible axial flow pump
進口潛水軸流泵概述:
潛水泵站因土建簡單,工程造價低,維護管理方便,運行簡便易于自動化,工作可靠性好,美化環境而得到迅速發展。
潛水泵站的主要設備-潛水電泵(簡稱潛水泵),潛水軸流泵和潛水混流泵,是將電機與軸流泵和混流泵結合而成的機電合一產品,是傳統長軸軸流泵和混流泵的更新換代產品。
潛水泵與傳統長軸泵除使用場合、進出水條件、特性參數基本上保持*外,還具有以下幾點顯著優勢:
1、泵站工程總投資節省30%以上;
2、建設周期節約40%以上;
3、機組安裝時間節約95%以上;
4、機組重量減輕50%以上;
5、省去泵站防洪墻投資;
6、維護費用低;
7、無運轉噪音,操作簡便,易于自動化運行;
8、地面建筑高度低,可省去泵房建筑,甚至可在地面以下建泵站。
因此,軸流泵和混流泵的新老客戶,在新建泵站項目中可以方便地以潛水泵替代,可在老泵站改造項目中以潛水泵更新,此類泵型主要適用于下列場合:
1、農田灌溉與排水;
2、市政排放雨水及輕度污水;
3、工業中工藝用水、冷卻水;
4、水利中調水工程。
英國格林公司潛水泵名義出水口徑從350、500、600、700、800、900、1000、1200、1400、1600共計十種口徑,流量范圍0.12-12m3/s,揚程范圍2-14m;功率范圍7.5-630kW;電壓等級380V、660V、3kV、6kV 、10kV。
進口潛水軸流泵技術參數
口徑:350-1600毫米
揚程:1.5-20米
流量:500-45000立方/小時
功率:22-800千瓦
電壓:380伏、6千伏、10千伏
進口潛水軸流泵guan網:http://www.twvalve。。net/html/3067.html
Imported submersible axial flow pump
Imported submersible axial flow pump Submersible axial flow pump
Introduction of imported submersible axial flow pump:
Because of the simple construction, low construction cost, convenient maintenance and management, the operation of the submersible pump station is easy to be automated, the work reliability is good, and the environment is developed rapidly.
The main equipment of submersible pump - submersible pump (hereinafter referred to as the submersible pump), and diving submersible axial flow pump mixed flow pump, mechanical and electrical combination motor with axial and mixed flow pump into one product, is the replacement of the traditional long axis and mixed flow pump update.
Submersible pump and the traditional long axis pump in addition to the use of occasions, access to water conditions, the basic parameters are consistent, but also has the following significant advantages:
1, pump station project total investment to save more than 30%;
2, the construction cycle savings of more than 40%;
3, unit installation time savings of more than 95%;
4, unit weight reduction of more than 50%;
5, save the pump wall flood control investment;
6, low maintenance costs;
7, no running noise, easy to operate, easy to run automatically;
8, the ground floor height is low, can save pump house construction, even can be built on the ground below the pumping station.
Therefore, axial and mixed flow pump of the new and old customers can easily replace the submersible pump at the new pumping station project, can be updated to the submersible pump at the old pumping station renovation project, this pump is mainly applicable to the following situations:
1, farmland irrigation and drainage;
2, municipal drainage and mild rain;
3, industrial process water, cooling water;
4, water diversion project.
The British green company submersible pump nominal water diameter from 350, 500, 600, 700, 800, 900, 1000, 1200, 1400, 1600 a total of ten kinds of diameter, flow range of 0.12-12m3/s, the head of 2-14m; the power range of 7.5-630kW; 380V, 660V, voltage 3kV, 6kV, 10kV.
Technical parameters of imported submersible axial flow pump
Diameter: 350-1600 mm
Head: 1.5-20 M
Flow: 500-45000 cubic meters / hour
Power: 22-800 kw
Voltage: 380 V, 6 thousand V, 10 thousand V
Imported submersible axial flow pump Guan net: http://www.twvalve。。net/html/3067.html
英國格林代理商上海凡而閥門有限公司,咨詢:
英國格林相關領域業績:杭州地鐵1號線、杭州地鐵2號線、杭州地鐵4號線,南京地鐵1號線、南京地鐵2號線、南京地鐵3號線、南京地鐵4號線、南京地鐵10號線。
帝國化學工業、美國科氏工業、美國聯合能源、艾默生電氣、盧克石油、中國海洋石油。
Green field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.
Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.